Generic filters
Exact matches only

T-Rx

Complete Terrazzo Solution

  • Incredible Stain Resistance
  • UV-Stable
  • Restores Terrazzo Color

Product Code: 152CF

Sizes Available

Product Videos




Safety Data Sheets

Literature

Complete Terrazzo Solution

Extremely Resistant to Cowpathing, Scratching and Scuffing, Dirt Penetration and Black Heel Marks.


152CF






Safety Data Sheets

Literature

Complete Terrazzo Solution

Extremely Resistant to Cowpathing, Scratching and Scuffing, Dirt Penetration and Black Heel Marks.


152CF



Properties

  • Type – 2-K Urethane / Acrylic Hybrid
  • Form – Opaque Liquid
  • Odor – Bland
  • Color – Milky White
  • Weight Per Gallon – 8.60 Lbs. (Part A)
  • pH – 8.65
  • V.O.C. (as used) – 231 g/l
  • Hardness (7 day Konig) – 130Secs.
  • Moisture Resistance – Non-Whitening When Exposed to Water
  • Slip Resistance – UL-Classified
  • Coverage – 1500-2500 Sq. Ft. Per Gal.

* Properties are typical and subject to usual manufacturing tolerances.

Prep & Mix

PREPARATION

Protect people, vehicles, property, plants and all surfaces not set to receive Pantheon Concrete Sealer from product, splash and wind drift. Use polyethylene or other protective material.

Pantheon Concrete Sealer may be applied to existing, cured concrete of any age. Surfaces must be clean and structurally sound. Remove all foreign materials including bond breakers, curing agents, surface grease and oil, and construction debris using the appropriate surface prep cleaner.

Follow cleaning with thorough water rinsing.

Neutralize and rinse acid-stained concrete before applying. Application may begin as soon as prepared surfaces are dry.

Surface and Air Temperatures: For application should be 50-100°F (10-38°C).

Equipment: Apply with an airless sprayer, a pour can and flat mop, or a heavyweight T-bar. DO NOT use a string mop.

NOTE: For stripping and maintaining asbestos containing flooring, follow OSHA or EPA guidelines.

ALWAYS TEST each surface for suitability and results before overall application.

Dilution & Mixing: Apply as packaged. Do not dilute or alter, or use other than as specified. Mix well before use.

Typical Coverage Rates: Variations in surface texture, concrete quality, porosity, job-site conditions, temperature and relative humidity affect coverage and drying. The following figures are for estimating only.

Estimated Coverage Rates

  • 400-800 square feet per gallon
  • 10-20 square meters per Liter

Calculating Project-Specific Target Coverage Rate

  1. Prepare a clean, dry and absorbent test area.
  2. Place one gallon of Pantheon into a clean pour can. Use the following Application Instructions. Repeat as needed for the desired finish.
  3. Measure the test area and the amount of Pantheon Concrete Sealer applied to get the Target Coverage Rate per gallon. Protect the completed test area from moisture for at least 4 hours.

Application & Maintenance

APPLICATION

The product may be applied to broomed, steel troweled, honed, polished or highly polished interior concrete surfaces.

  1. If applying with a flat mop, lightly wet a clean microfiber pad with Pantheon Concrete Sealer, leaving the pad damp.
  2. Spray-apply or use a pour can to apply Pantheon to the surface in a bead. Spread with a flat mop and damp microfiber pad or a heavyweight T-bar. Work from one control joint to another.
  3. Maintain a thin, even coating and wet edge. Stop spreading once drying begins. Do not overlap. Rinse mop between coats.
  4. Allow to dry tack free, typically 20-40 minutes.
  5. Repeat steps 1-4. Two coats minimum for stain protection. 3-4 coats for high gloss results.

FOR CURE ‘N SEAL USE:

  1. Spray-apply at a rate of 200 sq. ft. per gallon.
  2. If desired, for a more uniform appearance, use a roller applicator with ½-inch nap.

Protect from water for 4 hours. At 72°F (22°C) and 40% relative humidity, product dry times are:

  • To Touch: 30-60 minutes
  • Light Foot Traffic: 4 hours
  • Normal traffic: overnight

The product gains its full stain repellency properties in 7 days.

Cleanup: Before the product dries, clean tools and equipment with fresh water.

Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.

Scrub & Recoat

SCRUB AND RECOAT:

Equipment and Materials:

  • Auto scrubber
  • Blue pad
  • Mop and bucket
  • Blue Concentrate(2085FC) or Blue Concentrate SC(4085FC)
  • Properly mixed T-Rx material (see Mixing Directions)
  • Application vessel
    • Kai-Motion bucket – for large jobs
    • Watering can – for small to medium jobs
  • Flat mop equipped with a short-nap, microfiber mop head/pad

OPTIONAL* Equipment and Materials:

  • High speed burnisher
  • 6000 grit diamond pad
  • White polishing pad

* OPTIONAL equipment and materials are NOT necessary, but they improve final gloss of the coating.

Directions:

  1. Deep clean floor using Blue Concentrate(2085FC) (2 oz per gallon) or Blue Concentrate SC(4085FC) (1 oz per 2 gallons) and an auto scrubber using a blue pad.
  2. (OPTIONAL*): When floor is dry, polish the floor using a 6000 grit diamond pad on a high speed machine (1500­­­ RPM or higher).
  3. Damp mop or autoscrub with Blue Concentrate(2085FC) (2 oz per gallon) or Blue Concentrate SC(4085FC) (1 oz per 2 gallons) to pick up dust and debris.
  4. Apply 2 coats of T-Rx, waiting at least an hour and making sure the 1st coat is dry before applying 2nd coat.
  5. Wait 90 minutes after applying the last coat. Conduct the paper test to ensure floor is dry, and polish floor with a white polishing pad to accelerate the drying process.
  6. Polish the floor using a 6000 grit diamond pad on a high speed machine (1500 RPM or higher).
  7. Polish the floor again with a white polishing pad to even out appearance.

*OPTIONAL instructions are NOT necessary, but they improve final gloss of the coating.

Cleaning and Restoration:

  1. Use 525 Citrus Scrub N Shine(525FR), diluted at 3 to 4 ounces, in a spray bottle.
  2. Spray and let sit for 5 minutes.
  3. Buff the floor with an 8,000 grit diamond pad. The floor can be a little damp when buffing starts. It should haze slightly, and then become clear.
  4. Polish with a white pad for clarity.

Stain Resistance

Terrazzo Test Blocks (3 Coats)

1 Hour Covered Spot Test

 

Water – No Effect

Skydrol Hydraulic Fluid – No Effect

HCL – No Effect

Kerosene – No Effect

Diesel Fuel – No Effect

Gasoline – No Effect

Windshield Washer Fluid – No Effect

Automatic Transmission Fluid – No Effect

50% Ethanol – No Effect

Betadine (povidine-iodine 7.5%) – No Effect

70% Isopropanol – Slight Softening, Full Recovery

10% Ammonia – No Effect

Red Wine Vinegar – No Effect

Beet Juice – No Effect

Coca Cola – No Effect

Tomato Juice – No Effect

Beer – No Effect

Pickle Juice – No Effect

Mustard – Faint Stain, Full Recovery

Packaging

Product Code Sizes UPC Code Pack Size (inches) Cube (ft) Pack Wt. (lbs) Full Pallet
152CF 3 x One F-Style Gallon
(includes Parts A & B)
783366152049 12.75 x 8.75 x 15 0.97 28.00 39

 

  • Product Code: 152CF
  • Sizes: 3 x One F-Style Gallon (includes Parts A & B)
  • UPC Code: 783366152049
  • Pack Size (inches): 12.75 x 8.75 x 15
  • Cube (ft): 0.97
  • Pack Wt. (lbs): 28.00
  • Full Pallet: 39