Directions

Application:

1. Strip floors to remove old waxes, sealers and finishes.
2. Rinse thoroughly with 2 ounces per gallon of Nu-Tral Cleaner(507FC) diluted in cool water. Let dry.
3. With a clean rayon mop apply thin, even coats of Sportflex.
4. Under normal conditions, allow to dry for 30 minutes between coats.
5. For best results, apply a maximum of 4 coats in 24 hours.

Maintenance:
Daily:

1. Dust mop frequently to remove gritty soil.
2. Use our Nu-Tral Cleaner(507FC) to damp mop spills as they occur. Damp mop or auto-scrub nightly with Nu-Tral Cleaner(507FC).
3. Buff if desired with high speed equipment and ultra high speed pads.

Weekly:

1. To repair and deep clean floor, apply our restorer with auto-scrubber.
2. Allow floor to dry.
3. Burnish floor with high speed equipment.
   Note: Always dust mop after burnishing.

Periodic Recoating:

1. Dust mop entire floor then scrub aggressively using an 8 ounce per gallon mixture of Citrus Scrub ‘N Shine(525FR) and auto-scrubber with a red or 
   blue pad.
2. Rinse floor with 2 ounces per gallon of Nu-Tral Cleaner(507FC) diluted with cool water. Allow to dry.
3. Apply Sportflex. Apply no more than 4 coats of Sportflex in 24 hours.

See label directions and SDS for complete usage and safety instructions.