Green Strip
    Product Lines | Equipment | Product Systems | Technical Help

Training Aids | Sales Support


     

Green Strip
Environmentally-Responsible Floor Stripper (8881FX)

Features | Properties | General Directions | FAQ

Packaging Specifications |
MSDS

     
           


Features

  • Easily removes multiple coats of Green Finish from any floor.
  • Phosphate-free, butyl-free and caustic-free.
  • Non-corrosive per DOT to offer user safety and simplified shipping.
  • Leaves no alkaline residue behind, simplifying rinsing and eliminating recoat problems.
  • High activity - over 30% for maximum cost benefits and reduced inventory
  • Green Seal GS-40 certified.


     


Properties*

  • Type - Solvent Stripper
  • Form - Clear Liquid
  • Odor - Characteristic
  • Color - Colorless
  • Weight per Gallon - 8.48 Lbs.
  • pH - 11.4
  • pH 1% - 9.4
  • Storage Stability - Min. 1 Year
  • Freeze/Thaw - Passes 3 Cycles
  • Foam Height - Moderate
  • Actives - >30%
  • Typical Dilution - 1:4

* Properties are typical and subject to usual manufacturing tolerances.



General Directions**

READ BEFORE USING:

  1. To achieve best performance, experiment in small test area with various dilutions before applying generally.
  2. Dilute before using. Do not use on painted surfaces or wooden floors. Use cautiously for stripping linoleum, rubber or asphalt tile as stripper may cause bleaching, softening or bleeding.
  3. Wipe up any spills or splashing from baseboards or painted surfaces immediately.
  4. Dilute as instructed below. Stronger dilutions will not increase efficacy.

DIRECTIONS:

  1. To remove heavy build-up, dilute with warm water as follows:
    1 part stripper to 4 parts water.
  2. Apply liberally to floor covering 100 square feet at a time. Be sure to leave surface VERY wet!
  3. Allow to remain on floor 5 to 10 minutes. Agitate for 100% removal of old floor finish.
  4. Pick up solution using a wet vac or auto-scrubber. If any finish remains (around baseboards), reapply stripping solution and agitate as necessary.
  5. Rinse floor thoroughly. Allow floor to dry.
  6. Apply Green Finish.

NOTE: For stripping and maintaining asbestos containing tile, follow OSHA guidelines or EPA guidelines.

** See label directions and MSDS for complete usage and safety instructions.



Packaging Specifications

Package
Sizes
Available

UPC Codes

Pack Size
(inches)
Cube
(ft.)
Pack
Wt.
(Lbs.)
Full
Pallet
5 Gallon
Pail
783366888153
12 x 14
1.17
45.48
36