Dry Foam Rug Shampoo

Directions

Regular Soil: Dilute 5 ounces per gallon of water (1:24).
Extra Heavy Soil: Dilute 10 ounces per gallon of water (1:12). Apply solution with slight circular motion as you proceed from side to side – overlapping as you go back to other side. DON’T SOAK! Use just enough to produce a light lather. Do 9′ x 12′ area, then pick up with wet-dry vacuum. Brush pile in one direction to raise nap. Let dry, then proceed with next area.

Shampoo Applicator:
For use in hand operated applicators, dilute as above and follow manufacturer’s directions.

Hand Use:
Dilute 12 ounces per gallon of water (1:10). Apply suds or solution with a clean brush, sponge or cloth. Wipe off with a clean sponge or cloth. Let dry and vacuum to lift nap.

Special Rug Shampoo Equipment: 
For sprayers, dry foamers, conditioners, combination pile lifters and shampooers, etc. – use only enough shampoo to generate proper foam.

Upholstery:
Jet a stream of water into 1 ounce of shampoo at bottom of pan to create suds, (apply suds only) or dilute 1 part shampoo to 3 parts water and apply with hand foam sprayer. See “Hand Use” for further directions.

See label directions and SDS for complete usage and safety instructions.