Generic filters
Exact matches only

Pureshine® HS

High Solids, High Gloss Finish

  • All purpose, all system high solids finish with extreme lay-down gloss.
  • Exceptional long-term gloss and wear.
  • High solids formula offers greater protection with fewer coats.

Product Code: 216FF

Sizes Available

High Solids, High Gloss Finish

All purpose, all system high solids finish with extreme lay-down gloss.


216FF


High Solids, High Gloss Finish

All purpose, all system high solids finish with extreme lay-down gloss.


216FF


Additional Features

  • Non-yellowing, low maintenance, scuff-resistant formula is ideal for areas where frequent buffing is not performed.
  • Use in schools, offices, hospitals, retail stores, lobbies.

Properties

  • Type – Acrylic Emulsion
  • Form – Opaque Liquid
  • Odor – Bland
  • Color – Milky White
  • Weight Per Gallon – 8.65 Lbs.
  • pH – 7.6 – 8.6
  • Coverage – Up to 3,000 Sq. Ft. Per Gallon (75 m2 per liter)
  • Dry Time – 30 to 40 Minutes
  • Slip-Resistance – UL Classified
  • V.O.C. Content – < 275 gm/l

* Properties are typical and subject to usual manufacturing tolerances.

Directions

APPLICATION:

  1. Strip floors to remove old waxes, sealers and finishes.
  2. Rinse thoroughly and let dry. 3. With clean equipment apply thin, even coats of finish.
  3. Under normal conditions, allow to dry for 30 to 40 minutes between coats.
  4. For best results, apply a maximum of 3 coats in 24 hours.

NOTE: For stripping and maintaining asbestos containing tile, follow OSHA or EPA guidelines.

COVERAGE: One gallon covers up to 3,000 square feet (1 liter covers 75 m2).

MAINTENANCE:

  1. Daily: Sweep or dust mop as necessary to remove gritty soil.
  2. Dirty Floors: Clean with 2-4 oz. of Nu-Tral Cleaner (507FC) per gallon (16-32 ml per liter) of water. Rinse and let dry.
  3. Traffic Area: Clean with 2-4 oz. of Nu-Tral Cleaner (507FC) per gallon (16-32 ml per liter) of water. Rinse and let dry. Apply additional thin coats of floor finish to traffic lanes as needed.
  4. Buffing: If desired, periodic burnishing with semi-soft blended pads will enhance appearance.
  5. Periodic Complete Maintenance: Ordinarily, stripping is not required more than (1) or (2) times per year. Use up to 32 ozs. of our stripper per gallon (256 ml per liter) of water.

Read label before use. Keep out of reach of children. If medical advice is needed, have product container or label at hand.

See label directions and SDS for complete usage and safety instructions.

Application

  • Pureshine HS is easy to apply with a standard finish mop and dries perfectly clear.
  • For best results, apply three coats the first night, then follow-up a few days later with three more coats. This gives you the desired film thickness from which to properly maintain your floor.

Packaging

Product Code Sizes UPC Code Pack Size (inches) Cube (ft) Pack Wt. (lbs) Full Pallet
216FF-D55 55 Gallon
Drum
783366216000 24 x 34 10.41 496.63 4
216FF-5GP 5 Gallon
Pail
783366216055 12 x 14 1.17 46.33 36
216FF-GR4 4 x One
Gallon
783366216048 13 x 13.5 x 12.5 1.27 36.64 36
  • Product Code: 216FF-D55
  • Sizes: 55 Gallon Drum
  • UPC Code: 783366216000
  • Pack Size (inches): 24 x 34
  • Cube (ft): 10.41
  • Pack Wt. (lbs): 496.63
  • Full Pallet: 4
  • Product Code: 216FF-5GP
  • Sizes: 5 Gallon Pail
  • UPC Code: 783366216055
  • Pack Size (inches): 12 x 14
  • Cube (ft): 1.17
  • Pack Wt. (lbs): 46.33
  • Full Pallet: 36
  • Product Code: 216FF-GR4
  • Sizes: 4 x One Gallon
  • UPC Code: 783366216048
  • Pack Size (inches): 13 x 13.5 x 12.5
  • Cube (ft): 1.27
  • Pack Wt. (lbs): 36.64
  • Full Pallet: 36

Pads

  Propane Battery Electric (1000+ rpm)
3M Natural Blend White Natural Blend White Tan Burnish
Americo Combo Porko Elite Porko Elite
ETC Jaguar Jaguar Jaguar
Glit Blue Ice Blue Ice Blue Ice
Microtron Beige -or- Blue Ice Beige VL Natural Fiber
Norton Grizzly Bear “Lite” Grizzly Bear “Lite” Grizzly Bear “Lite”

* These are generalized classifications based on market research. Terms and definitions may be different from manufacturer to manufacturer; however, the above information will help to determine pad compatibility with various floor machines and Essential finishes on the market.