Generic filters
Exact matches only

Durabrite® HS

High Solids Finish

  • High solids formula offers greater protection with fewer coats.
  • Non-yellowing, low maintenance, scuff-resistant formula is ideal for areas where buffing is not performed.
  • Perfect for classrooms, patient rooms, offices, etc.
  • Use on vinyl tile, rubber, linoleum, terrazzo and quarry tile floors.

Product Code: 255FF

Sizes Available

High Solids Finish

High solids formula offers greater protection with fewer coats.


255FF


High Solids Finish

High solids formula offers greater protection with fewer coats.


255FF


Properties

  • Type – Acrylic Emulsion
  • Form – Opaque Liquid
  • Odor – Bland
  • Color – Milky White
  • Weight per Gallon – 8.63 Lbs.
  • pH – 7.8-8.4
  • Coverage – 3,000 Sq. Ft. Per Gallon
  • Dry Time – 30 Min.
  • Slip-Resistance – UL Classified
  • V.O.C. Content – < 260 gm/l

* Properties are typical and subject to usual manufacturing tolerances.

Directions

APPLICATION:

  1. Strip floors to remove old waxes, sealers and finishes.
  2. Rinse thoroughly and let dry.
  3. With clean equipment apply thin, even coats of finish.
  4. Under normal conditions, allow to dry for 30 minutes between coats.
  5. For best results, apply a maximum of 4 coats in 24 hours.

NOTE: For stripping and maintaining asbestos containing tile, follow OSHA or EPA guidelines.

COVERAGE: One gallon covers up to 3,000 square feet (1 liter covers 75 m2).

MAINTENANCE:

  1. Daily: Sweep or dust mop as necessary to remove gritty soil.
  2. Dirty Floors: Clean with 2-4 oz. of neutral floor cleaner per gallon (16-32 ml per liter) of water. Rinse and let dry.
  3. Traffic Area: Clean with 2-4 oz. of neutral floor cleaner per gallon (16-32 ml per liter) of water. Rinse and let dry. Apply additional thin coats of floor finish to traffic lanes as needed.
  4. Buffing: If desired, periodic burnishing with blended hair pads will enhance appearance.
  5. Periodic Complete Maintenance: Ordinarily, stripping is not required more than (1) or (2) times per year. Use up to 32 ozs. of our stripper per gallon (256 ml per liter) of water.

Read label before use. Keep out of the reach of children. If medical advice is needed, have product container or label at hand.

See label directions and SDS for complete usage and safety instructions.

Application

  • Durabrite HS is very easy to apply with a standard finish mop and dries perfectly clear.
  • Durabrite HS is a fast curing (~2 hours) finish and therefore is ideal for areas where traffic is heavy just after application.

Packaging

Product Code Sizes UPC Code Pack Size (inches) Cube (ft) Pack Wt. (lbs) Full Pallet
255FF-D55 55 Gallon
Drum
783366255009 24 x 34 10.41 495.53 4
255FF-5GP 5 Gallon
Pail
783366255054 12 x 14 1.17 46.23 36
255FF-GR4 4 x One
Gallon
783366255047 13 x 13.5 x 12.5 1.27 36.56 36
  • Product Code: 255FF-D55
  • Sizes: 55 Gallon Drum
  • UPC Code: 783366255009
  • Pack Size (inches): 24 x 34
  • Cube (ft): 10.41
  • Pack Wt. (lbs): 495.53
  • Full Pallet: 4
  • Product Code: 255FF-5GP
  • Sizes: 5 Gallon Pail
  • UPC Code: 783366255054
  • Pack Size (inches): 12 x 14
  • Cube (ft): 1.17
  • Pack Wt. (lbs): 46.23
  • Full Pallet: 36
  • Product Code: 255FF-GR4
  • Sizes: 4 x One Gallon
  • UPC Code: 783366255047
  • Pack Size (inches): 13 x 13.5 x 12.5
  • Cube (ft): 1.27
  • Pack Wt. (lbs): 36.56
  • Full Pallet: 36

Pads

Propane Battery Electric (1000+ rpm)
3M Tan Burnish Tan Burnish Tan Burnish
Americo Combo Combo Porko Elite
ETC Gorilla Gorilla Gorilla
Glit Buckaroo Buckaroo Buckaroo
Microtron PL Natural Poly PL Natural Poly PL Natural Poly
Norton Grizzly Bear “Lite” Grizzly Bear Grizzly Bear

* These are generalized classifications based on market research. Terms and definitions may be different from manufacturer to manufacturer; however, the above information will help to determine pad compatibility with various floor machines and Essential finishes on the market.