Frequently Asked Questions
Sometimes after my first or second coat of finish has been applied, I notice hazing under my bead of finish. Why does this occur?
There are a couple of reasons for this and they may be interrelated. What is happening is that the just applied finish re-emulsifies the existing coats of finish. To avoid this problem make sure your finish application area does not extend beyond 50-foot “blocks”. After applying the bead, proceed immediately to spreading. Finally, even though the previous coats of finish may be dry to the touch, they may not be ready for recoating. Always allow at least 30 minutes of dry time between coats – more time under humid conditions
Found In: Resilient Floor