Resilient Floor Care

Product Overview

Features
  • Tough urethane seal/finish for use on all stone and concrete floors.
  • Urethane formula protects stone and concrete floors from wear and simplifies maintenance.
  • Excellent chemical resistance.
  • Responds to high-speed buffing.
  • Use on concrete, terrazzo, quarry, paver brick, unglazed ceramic, slate and resilient tile floors.
Properties
  • Type – Urethane/Acrylic Emulsion
  • Form – Opaque Liquid
  • Odor – Bland
  • Color – Milky White
  • Weight Per Gallon – 8.58 Lbs.
  • pH – 8.4 – 8.9
  • Floor Solids – 17%
  • Coverage – Up to 2,000 Sq. Ft. Per Gallon (50 m2 per liter)
  • Dry Time – 30 to 45 Minutes
  • Slip-ResistanceUL Classified
  • V.O.C. Content – < 375 gm/l

* Properties are typical and subject to usual manufacturing tolerances.

General Directions

Application:

  1. Strip floors to remove old waxes, sealers and finishes.
  2. Rinse thoroughly and let dry.
  3. With clean equipment apply thin, even coats of Stonethane.
  4. Under normal conditions, allow to dry for 30 to 45 minutes between coats.
  5. For best results, apply a maximum of 4 coats in 24 hours.
    Note: Where floors have been acid crystallized, scrub at least once with a mild alkaline detergent. Do not use high alkaline strippers on marble and terrazzo floors.

Maintenance:
Daily:

  1. Sweep or dust mop as necessary to remove gritty soil.
  2. Use our neutral cleaner to damp mop spills as they occur. Damp mop or auto-scrub nightly with Nu-Tral Cleaner (#507).
  3. Buff if desired with high speed equipment and ultra high speed pads.

Weekly:

  1. To repair and deep clean floor, apply our Citrus Scrub ‘N Shine (#525) with mop or auto-scrubber.
  2. Allow floor to dry.
  3. Burnish floor with high speed equipment. This finish also responds to spray buffing with conventional speed equipment.
    Note: Always dust mop after burnishing or spray buffing.

Periodic Recoating:

  1. Dust mop entire floor then scrub aggressively using our Citrus Scrub ‘N Shine and auto-scrubber with a red or green pad.
  2. Use a blue pad for heavily marked or unusually dirty floor.
  3. Rinse floor and allow to dry.
  4. Apply one or two coats of Stonethane.

** See label directions and MSDS for complete usage and safety instructions.

Application Hints
  1. Stonethane is very easy to apply with a standard finish mop and dries perfectly clear.
  2. Use of a seal is recommended on concrete or porous floors.
Pad Recommendations
Propane
Battery
Electric (1000+ rpm)
3M
Natural Blend White
Natural Blend White
Tan Burnish
Americo
Combo -or-
Porko Elite
Combo -or-
Porko Elite
Porko
ETC
Gorilla Lite
Gorilla Lite
Gorilla
Glit
Jackeroo
Beige
Jackeroo
Microtron
PL Natural Poly
PL Natural Poly
PL Natural Poly
Norton
Pink “TopShine”
Pink “TopShine”
Pink “TopShine”

* These are generalized classifications based on market research. Terms and definitions may be different from manufacturer to manufacturer; however, the above information will help to determine pad compatibility with various floor machines and Essential finishes on the market.

Packaging Specifications
Package
Sizes
Available

UPC Codes

Pack Size
(inches)
Cube
(ft.)
Pack
Wt.
(Lbs.)
Full
Pallet
55 Gallon Drum
783366268009
23 x 34
10.41
492.78
4
5 Gallon
Pail
783366268054
12 x 14
1.17
45.98
36