|
|
|
|
|
|
|
|
Step
1:
Presoak
a clean finish mop in water and wring it out thoroughly.
Note:
Sportflex™ (#223) can be applied with
other applicators such as the E-Z Way™.
Step
2:
Line the inside of a clean mop bucket with a plastic
bag liner.
Step
3:
Fill the bucket with Sportflex (#223) finish.
Expect coverage of about 2,000 feet per gallon.
Step
4:
Soak the mop in the finish. Twist and tamp the
mop into the wringer. The mop should not drip heavily onto the floor.
Step
5:
Apply finish to the edges first. Create a border
for your work area.
Step
6:
Using the figure-eight method, apply finish filling
in the remainder of your work area.
Step
7:
Proceed in this fashion until the entire work
area is completed.
Step
8:
Allow
the first coat to dry thoroughly. Once dry, apply subsequent coats of
finish. A maximum of four coats in 24 hours should be applied.
|
|
 |
|
|
|
