|
Step
1:
Be
sure adequate walk-off mats exist at each entrance and that they are
vacuumed daily.
Step
2:
Carefully remove tape, labels and gum with a putty knife. Angle the
blade so you don’t damage the finish.
Step
3:
Dust mop the floor twice daily. Keeping grit off the floor will greatly
extend the finish life and appearance.
Step
4a:
Damp mop or auto-scrub weekly using Nu-Tral
Cleaner (#507). Diluted 2 ounces per gallon (1:64). During severe
weather months, more frequent cleaning may be necessary.
Be sure to avoid saturating the floor with cleaner solution.
-OR-
Step 4b:
Tack the floor clean using a block applicator and several large towels
moistened with Tacking Cleaner (#1129).
-OR-
Step
4c:
Use the KaiMotion
with Tacking Cleaner (#1129) and blue micro-fiber pads to clean floor.
|
