|
|
|
|
|
|
|
|
|
| |
|
|
|
Products
| Equipment | Product
Systems | Technical Help
Training Aids | Sales
Support
|
| |
|
|
|
|
|
|
|
Satin
Sport Kote®
Water-Based Urethane
Wood Finish (228SF)
Features | Properties
| General Directions
Application Hints | Packaging
Specifications | MSDS
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Single-component
formula means no pot life and no mess. Finish is useable
the next day if more coats are desired.
- Contains
reactive polymers that offer durability and appearance equal or
greater than oil-modified products.
- Excellent
black mark, scuff and soil resistance.
- One
hour dry time between coats under normal conditions. Only 24 hour
down time.
- Uniquely
restorable unlike traditional wood finishes.
- Suitable
for oak, maple and parquet floors.
- Large
area coverage – up to 1,000 sq. ft. per gallon.
.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Properties*
- Type
- Urethane/Acrylic Blend
- Form
- Opaque Liquid
- Odor
- Bland
- Color
- Off-White
- Dried
Film Color - Colorless
- Weight
per Gallon
- 8.65 Lbs.
- pH
- 7.0-8.0
- Floor
Solids - 29%
- 60°
Gloss
- < 30
- Storage
Stability - Up To 1 Year, Unopened
- Freeze/Thaw
- Passes 3 Cycles
- Slip-Resistance - UL Classified
- V.O.C.
- <300 gm/l
*
Properties are typical and subject to usual manufacturing tolerances.

|
|
|
|
|
|
|
|
|
|
General Directions**
- PREPARE
FLOOR: NOTE: This finish is not designed for application
to bare wood floors. Use only on previously sealed surfaces.
SCRUB
AND RECOAT: Dust mop floor and remove all chewing gum and
labels. Clean floor with a 8 ounce per gallon dilution of Citrus
Scrub ‘N Shine (#525). Screen with a 120 grit screen, black
or brown pad to sufficiently roughen floor. Tack or rinse the floor
with Nu-Tral Cleaner (#507)
until all residue has been removed.
NOTE:
Test previously coated floor in an inconspicuous area before recoating
to determine compatibility with existing finish. Apply 2 or 3 coats
of finish. See finish application instructions below.
-
APPLY FINISH:
Mix gently before using. Apply at a rate of 800-1000 square feet per
gallon. Use a clean, synthetic applicator. Apply thin, even coats
with the grain of the wood. Allow a dry time of at least 1 hour between
coats. Humid conditions will necessitate longer dry time. After the
first coat has dried, apply a second coat. It may be necessary to
screen the first coat if grain raising has occurred or it has dried
longer than 4 hours. If so, screen the floor with a previously used
120 grit screen or brown or black pad. Always vacuum and tack thoroughly
after screening.
NOTE:
Do not pour unused finish back into original container. For
best results, use product within 1 year of purchase date.
-
MAINTAIN DAILY:
Dust mop at least daily, or more as required, to keep floor dust and
dirt free. Damp mop spills, salt residue, etc. with Nu-Tral Cleaner
and a thoroughly wrung mop.
- MAINTAIN
WEEKLY: If soil conditions are heavy, auto-scrub weekly with
red pads and a 2 ounce per gallon dilution of Nu-Tral Cleaner. Refer
to the Wood Floor Care Wall Chart or Manual for further details.
- RESTORATION:
Dust mop floor. Auto-scrub with red pads with an 8 ounce per gallon
dilution of Citrus Scrub ‘N Shine. Then dry burnish with recommended
pad.
**
See label directions and MSDS for complete usage and safety instructions.

|
|
|
|
|
|
|
|
|
|
Application Hints
- Satin
Sport Kote® should be gently mixed before application.
- During
application, make sure air handlers are OFF and doors are closed to
eliminate flash drying. After the application is complete and the
finish has skinned over, ventilation can be turned back on.
- Satin
Sport Kote® can be applied over most existing finishes
including oil-modified products. If uncertain, test in a small, inconspicuous
area for compatibility first.
- Under
high humidity, dry times for Satin Sport Kote® will
vary greatly. Do not apply a second coat if the first coat is still
tacky.
- Two
coats is usually sufficient on recoats. If a third coat is desired,
make sure the previous coats are thoroughly dry before applying product.

|
|
|
|
|
|
|
|
|
|
Packaging Specifications
|
Package
|
Sizes
Available
|
|
Pack
Size
(inches)
|
Cube
(ft.)
|
Pack
Wt.
(Lbs.)
|
Full
Pallet
|
|
|
2
x 2½ Plastic Container |
783366228034
|
14
x 9.5 x 15.25
|
1.17
|
46.11 |
36
|

|
|
|
|
|
|
|
|
|
|
|
|