Wood Seal
Fast-Drying Water-Based Floor Seal (226SF)

Features | Properties | General Directions

Application Hints | Packaging Specifications | MSDS

Features

• Water-based seal for new or newly sanded wood floors.
• Perfect for gym floors, racquetball courts, dance floors and other wood surfaces.
• Non-yellowing, fast-build formulation prepares wood for finish layers.
• Easily abrades smooth with standard floor pads.
• Fast drying - 60 minutes under normal conditions.
  
  

Properties*

• Type - Acrylic Emulsion
• Form - Opaque Liquid
• Odor - Bland
• Color - Milky White
• Weight per Gallon - 8.73 Lbs.
• pH - 7.3 - 8.3
• Floor Solids - 30%
• Coverage - Up To 600 Sq. Ft. Per Gallon
• Slip-Resistance - N/A
• V.O.C. Content** - < 350 gm/l
  

* Properties are typical and subject to usual manufacturing tolerances.

**Not for sale in Southern California counties of Orange, Los Angeles,
. Riverside, and San Bernadino.

General Directions**

WOOD PREPARATION:

1. Sand floor using appropriate procedures. All old finish or wax should be removed.
   
2. Finish sanding with a new 120 to 150-grit screen. Do not use steel wool.
   
3. Vacuum all dust and tack with clean, water dampened towels or microfiber pads that have been tightly wrung out. Tack until all dust has been removed.
4. Allow floor to dry until there is no sign of moisture.

SEAL APPLICATION:
(use on any new or newly sanded floors)

1. Check moisture content of wood. It should be 10% or less before sealing.
   
2. Apply seal with a weighted T-bar.
   
3. Allow first coat to dry 1 hour (longer dry times will be necessary under high humidity). Recheck floor with moisture meter. If moisture reading is higher than starting point, allow more dry time.
   
4. Buff floor smooth with a green or maroon pad. DO NOT BUFF WITH SAND SCREENS.
   
5. Tack until all dust has been removed with clean, water-dampened towels or microfiber pads that are tightly wrung out.
   
6. Apply second coat of seal using a weighted T-bar. Allow 12 or more hours of cure time.
   
7. Repeat steps 4 – 5 from above.
8. If desired, paint game lines using a high quality, 100% acrylic latex paint. If not painting, proceed to step 10 below.
   
9. Allow game lines 24 hours of cure time. Then buff the lines with a green or maroon pad and tack the entire floor as directed in step 5 above.
10. Apply 3 coats of Sport Kote® Water-Based Urethane Wood Finish or Satin Sport Kote. See product label for complete details.

Note: If any grain raising is noticed between coats of Sport Kote, buff the floor smooth with a green or maroon pad and tack.

** See label directions and MSDS for complete usage and safety instructions.

Application Hint

1. Under high humidity and high temperatures, dry times for Wood Seal will vary greatly. Do not apply a second coat if the first coat is still tacky.

Packaging Specifications

Package	Sizes Available	UPC Codes	Pack Size (inches)	Cube (ft.)	Pack Wt. (Lbs.)	Full Pallet
	2 x 2½ Plastic Container	783366226030	14 x 9.5 x 15.25	1.17	46.51	36