Sportflex
 
      Products | Equipment | Product Systems | Technical Help

Training Aids | Sales Support

       
 

Sportflex™
Synthetic Sports Floor Finish (223SF)

Features | Properties | General Directions

Application Hints | Packaging Specifications

Literature Sheet | MSDS

 

     
     


Features

  • Tough, flexible long-lasting film protects all synthetic sports floors from premature wear.
  • Urethane-fortified for maximum durability and beauty.
  • For use on all rubberized urethane, vinyl and epoxy-based
    sports floors.
  • Combination seal and finish.


     
 
   
           
 


Properties*

  • Type - Urethane/Acrylic Blend
  • Form - Opaque Liquid
  • Odor - Bland
  • Color - Milky White
  • Weight per Gallon - 8.54 Lbs.
  • pH - 8.2-8.6
  • Floor Solids - 18%
  • Coverage - 2,000 Sq. Ft. Per Gallon (50 m2 Per Liter)
  • Slip-Resistance - UL Classified
  • V.O.C. Content - < 300 gm/l

* Properties are typical and subject to usual manufacturing tolerances.


 


General Directions**

Application:

  1. Strip floors to remove old waxes, sealers and finishes.
  2. Rinse thoroughly with 2 ounces per gallon of Nu-Tral Cleaner (#507) diluted in cool water. Let dry.
  3. With a clean rayon mop apply thin, even coats of Sportflex.
  4. Under normal conditions, allow to dry for 30 minutes between coats.
  5. For best results, apply a maximum of 4 coats in 24 hours.

Maintenance:
Daily:

  1. Dust mop frequently to remove gritty soil.
  2. Use our Nu-Tral Cleaner to damp mop spills as they occur. Damp mop or auto-scrub nightly with Nu-Tral Cleaner.
  3. Buff if desired with high speed equipment and ultra high speed pads.


Weekly:

  1. To repair and deep clean floor, apply our restorer with auto-scrubber.
  2. Allow floor to dry.
  3. Burnish floor with high speed equipment.
    Note: Always dust mop after burnishing.


Periodic Recoating:

  1. Dust mop entire floor then scrub aggressively using an 8 ounce per gallon mixture of Citrus Scrub 'N Shine (#525) and auto-scrubber with a red or
    blue pad.
  2. Rinse floor with 2 ounces per gallon of Nu-Tral Cleaner diluted with cool water. Allow to dry.
  3. Apply Sportflex. Apply no more than 4 coats of Sportflex in 24 hours.

** See label directions and MSDS for complete usage and safety instructions.


 


Application Hints

  1. Sportflex is a slow curing product and may require a buffing with a soft polishing pad a few days after application.


 


Packaging Specifications

Package
Sizes
Available

UPC Codes

Pack Size
(inches)
Cube
(ft.)
Pack
Wt.
(Lbs.)
Full
Pallet
5 Gallon
Pail
783366223053
12 x 14
1.17
45.78
36