|
Step
1: Assemble Supplies and Safety Equipment
Important:
Be sure to wear goggles, protective gloves, rubber-soled shoes and long
sleeves when renovating a shower room. Some or all of this equipment
may be necessary to do your job thoroughly:
Step
2: Place Caution Signs
Place Wet Floor signs near your work
area.
Step
3: Prepare Shower and Restroom Maintenance Unit
Be sure maintenance unit contains Foaming
Restroom and Shower Cleaner (#605) and Quat
Rinse (#2331).
Step 4: Pretreat Walls.
Start at the bottom and apply Foaming Restroom and Shower Cleaner
(#605) evenly over entire wall.
Step 5: Clean and Rinse Walls
Scrub
walls with a deck brush. Shower heads, soap trays and other fixtures
should be scrubbed with a white hand pad. Thoroughly rinse walls.
Step 6: Pretreat Floor.
Apply Foaming Restroom and Shower Cleaner (#605) evenly over entire
floor. Let this solution stand for 5 minutes.
Step 7: Clean Floor
Scrub floor with a deck brush or single disk machine.
Step 8: Rinse
Rinse the floor thoroughly. Squeegee to drain.
Step 9: Sanitize Walls and Floor
Working top down and out of shower room, sanitize all walls and floor.
Do not squeegee floor dry. Let sanitizer air dry.
|
