Xlerate
    Product Lines | Equipment | Product Systems | Technical Help

Training Aids | Sales Support


     

Xlerate
Ultra Concentrated High-Productivity Stripper (2917FX)

Features | Properties | General Directions | FAQ

Packaging Specifications |
MSDS

     
           


Features

  • Aggressive dual-solvent formulation easily strips all seals and finishes on the first pass.
  • Ultra-concentrated 1:19 dilution provides the utmost in economy and convenience and greatly reduces inventory.
  • Powerful enough to remove multiple layers and/or highly burnished finishes.
  • Low odor formulation affords user comfort and eliminates complaints.
  • Effective in cold to warm water.


     


Properties*

  • Type - High Active Stripper
  • Form - Clear Liquid
  • Odor - Slight Solvent
  • Color - Aqua
  • Weight per Gallon - 8.47 Lbs.
  • pH - 10.5-11.5
  • Foam Height - Very Low
  • Actives - >80%

* Properties are typical and subject to usual manufacturing tolerances.



General Directions**

READ BEFORE USING:

  1. This is a highly aggressive formula. Read precautions below.
  2. Dilute before using. Do not use on painted surfaces or wooden floors. Use cautiously for stripping linoleum, rubber or asphalt tile as stripper may cause bleaching, softening or bleeding.
  3. Wipe up any spills or splashing from baseboards or painted surfaces immediately.

DIRECTIONS:

  1. Dilute with warm water as follows:
    1 part stripper to 19 parts water. DO NOT use at stronger dilution ratios.
  2. Apply liberally to floor covering 100 square feet at a time. Be sure to leave surface VERY wet!
  3. Allow to remain on floor 3 to 5 minutes. Agitate for 100% removal of old floor finish.
  4. Pick up solution using a wet vac or auto-scrubber. If any finish remains (around baseboards), reapply stripping solution and agitate as necessary.
  5. Rinse floor thoroughly. Recommended two rinses with Nu-Tral Cleaner (#507) in last rinse. Allow floor to dry.
  6. Apply finish or seal.

NOTE: For stripping and maintaining asbestos containing tile, follow OSHA guidelines or EPA guidelines.

**See label directions and MSDS for complete usage and safety instructions.



Packaging Specifications

Package
Sizes
Available

UPC Codes

Pack Size
(inches)
Cube
(ft.)
Pack
Wt.
(Lbs.)
Full
Pallet
4 x One Gallon
783366291748
13 x 13.5 x 12.5
1.27
36.58
27
6 x One Quart
783366291717
10.5 x 7 x 11
0.47
13.985
64