Solaris
    Product Lines | Equipment | Product Systems | Technical Help

Training Aids | Sales Support

     

Solaris™
High Performance Floor Coating (287FF)

Features | Properties | General Directions

Application Hints | Pad Recommendations | FAQ

Packaging Specifications |
Literature Sheet |
MSDS

     
           


Features

  • Uses proprietary XL(2)™ polymer technology for extreme gloss, excellent wear properties and extended life through a dual cross-linking system.
  • XL(2) polymers’ laydown slip resistance is as tight as a just-burnished floor.
  • High solids content means greater protection and greater gloss with fewer coats.
  • Self-sealing formulation.
  • Use on vinyl tile, rubber, linoleum, terrazzo and quarry tile floors.


     


Properties*

  • Type - XL(2) Polymer Emulsion
  • Form - Opaque Liquid
  • Odor - Bland
  • Color - Milky White
  • Weight Per Gallon - 8.60 Lbs.
  • pH - 8.0 - 8.4
  • Floor Solids - 23%
  • Coverage - Up to 3,000 Sq. Ft. Per Gallon (75 m² per liter)
  • Storage Stability - Min. 1 Year
  • Freeze/Thaw - Passes 3 Cycles
  • Slip-Resistance - UL Classified
  • V.O.C. Content - < 350 gm/l

* Properties are typical and subject to usual manufacturing tolerances.



General Directions**

Application:

  1. Strip floors to remove old waxes, sealers and finishes.
  2. Rinse thoroughly and let dry.
  3. With a clean finish mop apply thin, even coats of Solaris.
  4. Under normal conditions, allow to dry for 30 minutes between coats.
  5. For best results, apply a maximum of 4 coats in 24 hours.

Maintenance:

  1. Daily: Sweep or dust mop as necessary to remove gritty soil.
  2. Dirty Floors: Clean with 2-4 oz. of Nu-Tral Cleaner (#507) per gallon of water. Rinse and let dry.
  3. Traffic Area: Clean with 2-4 oz. of Nu-Tral Cleaner per gallon of water. Rinse and let dry. Apply additional thin coats of floor finish to traffic lanes as needed.
  4. Buffing: If desired, periodic burnishing with blended pads will enhance appearance.
  5. Periodic Complete Maintenance: Ordinarily, stripping is not required more than (1) or (2) times per year. Use up to 32 ozs. of our stripper per
    gallon of water.

** See label directions and MSDS for complete usage and safety instructions.



Application Hints

  1. Solaris is very easy to apply with a standard finish mop and dries perfectly clear.
  2. For best results in high traffic locations (such as supermarkets) and entranceways, apply four coats the first night, then follow-up a few days later with four more coats. This gives you the desired film thickness from which to properly maintain your floor.



Pad Recommendations *

 
Propane
Battery
Electric (1000+ rpm)
3M
Natural Blend
W hite
TopLine Speed Burnish
TopLine Speed Burnish
Americo
Combo
Luster Lite
Beige
ETC
Gorilla Lite
Aqua PLUS
Aqua PLUS
Glit
Jackeroo Lite
Peach
Peach
Microtron
Jackeroo Lite
Champagne
Beige
Norton
Lite Blue Burnish
Grizzly Bear Lite
Grizzly Bear Lite

* These are generalized classifications based on market research. Terms and definitions may be different from manufacturer to manufacturer; however, the above information will help to determine pad compatibility with various floor machines and Essential finishes on the market.





Packaging Specifications

Package
Sizes
Available

UPC Codes

Pack Size
(inches)
Cube
(ft.)
Pack
Wt.
(Lbs.)
Full
Pallet
55 Gallon Drum
783366287000
23 x 34
10.41
493.88
4
5 Gallon
Pail
783366287055
12 x 14
1.17
46.08
36
4 x One Gallon
783366287048
13 x 13.5 x 12.5
1.27
36.44
36