X-Coat^™22
High Solids Extreme Performance Coating (265FF)

Features | Properties | General Directions

Application Hints | Pad Recommendations | FAQ

Packaging Specifications | MSDS

Features

• Combines deep gloss, high durability and ease-of-use into one product.
• High solids formula offers greater protection with fewer coats.
• Non-yellowing, low maintenance formula offers excelent black mark and scuff resistance
• Perfect for classrooms, patient rooms, offices and retail establishments.
• Ideal for limited maintenance programs, yet responds to daily burnishing, if desired.
• Fast drying - 30 minutes under normal conditions.
• Use on vinyl, rubber, linoleum, terrazzo, quarry tile and sealed concrete floors.
• Slip-resistant - UL Classified.

Properties*

• Type - Acrylic Emulsion
• Form - Opaque Liquid
• Odor - Bland
• Color - Milky White
• Weight per Gallon - 8.61 Lbs.
• pH - 8.0 - 8.5
• Floor Solids - 22%
• Coverage - Up to 3,000 Sq. Ft. Per Gallon (75 m² per liter)
• Storage Stability - Min. 1 Year
• Freeze/Thaw - Passes 3 Cycles
• V.O.C. Content - < 230 gm/l

* Properties are typical and subject to usual manufacturing tolerances.

General Directions**

Application:

1. Strip floors to remove old waxes, sealers and finishes.
2. Rinse thoroughly and let dry.
3. With clean rayon mop apply thin, even coats of X-Coat 22.
4. Under normal conditions, allow to dry for 30 minutes between coats.
5. For best results, apply a maximum of 4 coats in 24 hours.

Maintenance:

1. Daily: Sweep or dust mop as necessary to remove gritty soil.
2. Dirty Floors: Clean with 2-4 oz. of Nu-Tral Cleaner (#507) per gallon of water. Rinse and let dry.
3. Traffic Area: Clean with 2-4 oz. of Nu-Tral Cleaner per gallon of water. Rinse and let dry. Apply additional thin coats of floor finish to traffic lanes as needed.
4. Buffing: If desired, periodic burnishing with blended hair pads will enhance appearance.
5. Periodic Complete Maintenance: Ordinarily, stripping is not required more than (1) or (2) times per year. Use up to 32 ozs. of our stripper per gallon of water.

** See label directions and MSDS for complete usage and safety instructions.

Application Hints

1. X-Coat 22 is very easy to apply with a standard finish mop and dries perfectly clear.
2. For best results, apply four coats the first night, then follow-up a few days later with four more coats. This gives you the desired film thickness from which to properly maintain your floor.

Pad Recommendations *

* These are generalized classifications based on market research. Terms and definitions may be different from manufacturer to manufacturer; however, the above information will help to determine pad compatibility with various floor machines and Essential finishes on the market.

Packaging Specifications

Package	Sizes Available	UPC Codes	Pack Size (inches)	Cube (ft.)	Pack Wt. (Lbs.)	Full Pallet
	55 Gallon Drum	783366265009	23 x 34	10.41	495.53	4
	5 Gallon Pail	783366265053	12 x 14	1.17	46.23	36
	4 x One Gallon	783366265046	13 x 13.5 x 12.5	1.27	36.56	36