X-Coat
    Product Lines | Equipment | Product Systems | Technical Help

Training Aids | Sales Support


     

X-Coat
Extreme Performance Coating (264FF)

Features | Properties | General Directions

Application Hints | Pad Recommendations
| FAQ

Packaging Specifications |
Literature Sheet | MSDS

     
           


Features

  • Combines deep gloss, high durability and ease-of-use into one product.
  • High gloss acrylic polymers produce a beautiful, long-lasting shine to reduce maintenance.
  • Perfect for classrooms, patient rooms, offices and retail establishments.
  • Ideal for limited maintenance programs, yet responds to daily burnishing, if desired.
  • Fast drying - 30 minutes under normal conditions.
  • Use on vinyl, rubber, linoleum, terrazzo, quarry tile and sealed concrete floors.
  • Slip-resistant - UL Classified.


     


Properties*

  • Type - Acrylic Emulsion
  • Form - Opaque Liquid
  • Odor - Bland
  • Color - Milky White
  • Weight per Gallon - 8.57 Lbs.
  • pH - 8.0-8.5
  • Floor Solids - 18%
  • Coverage - Up to 3,000 Sq. Ft. Per Gallon (75 m2 per liter)
  • Storage Stability - Min. 1 Year
  • Freeze/Thaw - Passes 3 Cycles
  • V.O.C. Content - < 230 gm/l

* Properties are typical and subject to usual manufacturing tolerances.



General Directions**

Application:

  1. Strip floors to remove old waxes, sealers and finishes.
  2. Rinse thoroughly and let dry.
  3. With clean rayon mop apply thin, even coats of X-Coat.
  4. Under normal conditions, allow to dry for 30 minutes between coats.
  5. For best results, apply a maximum of 4 coats in 24 hours.

Maintenance:

  1. Daily: Sweep or dust mop as necessary to remove gritty soil.
  2. Dirty Floors: Clean with 2-4 oz. of Nu-Tral Cleaner (#507) per gallon of water. Rinse and let dry.
  3. Traffic Area: Clean with 2-4 oz. of Nu-Tral Cleaner per gallon of water. Rinse and let dry. Apply additional thin coats of floor finish to traffic lanes as needed.
  4. Buffing: If desired, periodic burnishing with blended hair pads will enhance appearance.
  5. Periodic Complete Maintenance: Ordinarily, stripping is not required more than (1) or (2) times per year. Use up to 32 ozs. of our stripper per gallon of water.

** See label directions and MSDS for complete usage and safety instructions.



Application Hints

  1. X-Coat is very easy to apply with a standard finish mop and dries perfectly clear.
  2. For best results in high traffic locations (such as supermarkets) and entranceways, apply four coats the first night, then follow-up a few days later with four more coats. This gives you the desired film thickness from which to properly maintain your floor.


 


Pad Recommendations *

 
Propane
Battery
Electric (1000+ rpm)
3M
Natural Blend White
Natural Blend White
Tan Burnish
Americo
Combo
Luster Lite
Beige
ETC
Gorilla Lite
Aqua PLUS
Aqua PLUS
Glit
100-D Neutral
Polythermal
100-D Neutral
Polythermal
100-D Neutral
Polythermal
Microtron
Jackeroo Lite
Beige
Beige
Norton
Grizzly Bear "Lite"
Thermal
Thermal

* These are generalized classifications based on market research. Terms and definitions may be different from manufacturer to manufacturer; however, the above information will help to determine pad compatibility with various floor machines and Essential finishes on the market.





Packaging Specifications

Package
Sizes
Available

UPC Codes

Pack Size
(inches)
Cube
(ft.)
Pack
Wt.
(Lbs.)
Full
Pallet
55 Gallon Drum
783366264002
23 x 34
10.41
493.88
4
5 Gallon
Pail
783366264056
12 x 14
1.17
46.08
36
4 x One Gallon
783366264049
13 x 13.5 x 12.5
1.27
36.44
36