|
|
|
|
|
|
|
|
| |
|
|
Product
Lines | Equipment | Product
Systems | Technical Help
Training Aids | Sales
Support
|
| |
|
|
|
|
|
Durabrite®
HS
High Solids Finish
(255FF)
Features | Properties
| General Directions
Application Hints | Pad Recommendations
|
FAQ
Packaging Specifications | MSDS
|
 |
| |
|
|
|
|
|
|
| |
|
|
|
|
|
Features
- High
solids formula offers greater protection with fewer coats.
- Non-yellowing,
low maintenance, scuff-resistant formula is ideal for areas where
buffing is not performed.
- Perfect
for classrooms, patient rooms, offices, etc.
- Use
on vinyl tile, rubber, linoleum, terrazzo and quarry tile floors.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Properties*
- Type
- Acrylic Emulsion
- Form
- Opaque Liquid
- Odor
- Bland
- Color
- Milky White
- Weight
per Gallon - 8.63 Lbs.
- pH
- 7.8-8.4
- Floor
Solids - 22%
- Coverage
- 3,000 Sq. Ft. Per Gallon
- Dry
Time
- 30 Min.
- Slip-Resistance
- UL Classified
- V.O.C.
Content - < 260 gm/l
*
Properties are typical and subject to usual manufacturing tolerances.
|
|
|
|
|
|
|
|
General Directions**
Application:
-
Strip floors to remove old waxes, sealers and finishes.
- Rinse
thoroughly and let dry.
- With
clean rayon mop apply thin, even coats of finish.
- Under
normal conditions, allow to dry for 30 minutes between coats.
- For
best results, apply a maximum of 4 coats in 24 hours.
Maintenance:
-
Daily: Sweep or dust mop as necessary to remove gritty soil.
- Dirty
Floors: Clean with 2-4 oz. of Nu-Tral Cleaner
(#507) per gallon of water. Rinse and let dry.
- Traffic
Area: Clean with 2-4 oz. of Nu-Tral Cleaner per gallon of water. Rinse
and let dry. Apply additional thin coats of floor finish to traffic
lanes as needed.
- Buffing:
If desired, periodic burnishing with blended hair pads will enhance
appearance.
- Periodic
Complete Maintenance: Ordinarily, stripping is not required more than
(1) or (2) times per year. Use up to 32 ozs. of our stripper per gallon
of water.
**
See label directions and MSDS for complete usage and safety instructions.
|
|
|
|
|
|
|
|
Application Hints
- Durabrite
HS is very easy to apply with a standard finish mop and dries perfectly
clear.
- For
best results, apply four coats the first night, then follow-up a few
days later with four more coats. This gives you the desired film thickness
from which to properly maintain your floor.
- Durabrite
HS is a fast curing (~2 hours) finish and therefore is ideal for areas
where traffic is heavy just after application.
|
|
|
|
|
|
|
|
Pad Recommendations *
| |
Propane |
Battery |
Electric
(1000+ rpm) |
3M |
Tan
Burnish |
Tan
Burnish |
Tan
Burnish |
Americo |
Combo
|
Combo |
Porko
Elite |
ETC |
Gorilla |
Gorilla |
Gorilla |
Glit |
Buckaroo |
Buckaroo |
Buckaroo |
Microtron |
PL
Natural Poly |
PL
Natural Poly |
PL
Natural Poly |
Norton |
Grizzly
Bear "Lite" |
Grizzly
Bear |
Grizzly
Bear |
*
These are generalized classifications based on market research. Terms
and definitions may be different from manufacturer to manufacturer; however,
the above information will help to determine pad compatibility with various
floor machines and Essential finishes on the market.
|
|
|
|
|
|
|
|
Packaging Specifications
|
Package |
Sizes
Available |
|
Pack
Size
(inches) |
Cube
(ft.) |
Pack
Wt.
(Lbs.) |
Full
Pallet |
|
|
55
Gallon Drum |
783366255009 |
23
x 34 |
10.41 |
495.53 |
4 |
|
|
5
Gallon
Pail |
783366255054 |
12
x 14 |
1.17 |
46.23 |
36 |
|
|
4
x One Gallon |
783366255047 |
13
x 13.5 x 12.5 |
1.27 |
36.56 |
36 |
|
