Spectacular "Plus"
Ultra High Speed Finish (239FF)

Features | Properties | General Directions

Application Hints | Pad Recommendations | FAQ

Packaging Specifications | MSDS

Features

• Wet-look, high speed finish for daily burnishing.
• Repeated burnishing toughens film and produces a "deep gloss".
• Will not powder or yellow.
• Easily rejuvenated with mop-on, automatic or spray-buff restorers.
• Recoats and "feathers" easily for prolonged finish life.
• Use on vinyl tile, rubber, linoleum, terrazzo and quarry tile floors.

Properties*

• Type - Acrylic Metal Interlock
• Form - Opaque Liquid
• Odor - Bland
• Color - Milky White
• Weight per Gallon - 8.54 Lbs.
• pH - 8.3-8.8
• Floor Solids - 18%
• Coverage - up to 3,000 Sq. Ft. Per Gallon (75 m² per liter)
• Dry Time - 30 Minutes
• Slip-Resistance - UL Classified
• V.O.C. Content - < 250 gm/l
  

* Properties are typical and subject to usual manufacturing tolerances.

General Directions**

Application:

1. Strip floors to remove old waxes, sealers and finishes.
2. Rinse thoroughly and let dry.
3. With a clean rayon mop apply thin, even coats of Spectacular "Plus".
4. Under normal conditions, allow to dry for 30 minutes between coats.
5. For best results, apply a maximum of 4 coats in 24 hours.

Maintenance:
Daily:

1. Sweep or dust mop frequently to remove gritty soil.
2. Use our Nu-Tral Cleaner (#507) to damp mop spills as they occur. Damp mop or auto-scrub nightly with Nu-Tral Cleaner.
3. Buff if desired with high speed equipment and soft ultra high speed pads.

Weekly:

1. To repair and deep clean floor, apply Citrus Scrub 'N Shine (#525) with mop or auto-scrubber.
2. Allow floor to dry.
3. Burnish floor with high speed equipment. This finish also responds to spray buffing with conventional speed equipment. Note: Always dust mop after burnishing or spray buffing.

Periodic Recoating:

1. Dust mop entire floor then scrub aggressively using Citrus Scrub 'N Shine and auto-scrubber with a red or green pad.
2. Use a blue pad for heavily marked or unusually dirty floor.
3. Rinse floor and allow to dry.
4. Apply one or two coats of Spectacular "Plus".

** See label directions and MSDS for complete usage and safety instructions.

Application Hints

1. Spectacular "Plus" can be applied to almost any substrate including rubber, synthetic gym floors, linoleum and unglazed ceramic. It also works on all traditional surfaces such as VCT and terrazzo.
2. Spectacular "Plus" is very easy to apply with a standard finish mop and
   dries perfectly clear.
3. For best results, apply four coats the first night, then follow-up a few days
   later with four more coats. This gives you the desired film thickness from
   which to properly maintain your floor.
4. Spectacular "Plus" cures slower than many finishes. A soft polishing pad (white or similar) is usually recommended for burnishing the first few days
   after application.

Pad Recommendations *

Packaging Specifications

Package	Sizes Available	UPC Codes	Pack Size (inches)	Cube (ft.)	Pack Wt. (Lbs.)	Full Pallet
	55 Gallon Drum	783366239009	23 x 34	10.41	490.58	4
	5 Gallon Pail	783366239054	12 x 14	1.17	45.78	36
	4 x One Gallon	783366239047	13 x 13.5 x 12.5	1.27	36.2	36