|
|
|
|
|
|
|
|
| |
|
|
Product
Lines | Equipment | Product
Systems | Technical Help
Training Aids | Sales
Support
|
| |
|
|
|
|
|
X-Coat™ Nano
Revolutionary Floor Finish (88FF)
Features | Properties
| General Directions
Application Hints | Pad Recommendations |
FAQ
Packaging Specifications | Literature Sheet | MSDS
 X-Coat Nano Video | Video Testimonial
|
 |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Incorporates our patented nano-zinc technology for more thorough and denser cross-linking of finish.
- Nano-zinc cross-linking provides superior:
-
Lay-down gloss
- Gloss build
-
Durability
-
Mark resistance
- Soil resistance
-
Dry and recoat times
- Ammonia-free for dramatically-reduced odor.
- Ideal
for limited maintenance programs, yet responds to daily burnishing, if desired.
- Low-emissions formula - meets California's new 1% VOC Regulation.
- Fast-drying - 15 to 20 minutes under normal conditions.
- Slip-resistant - UL Classified.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Properties*
- Type
- Acrylic Emulsion
- Form
- Opaque Liquid
- Odor
- Bland
- Color
- Milky White
- Weight
per Gallon - 8.57 Lbs.
- pH
- 8.0 - 8.5
- Floor
Solids - 20%
- Coverage - Up to 3,000 Sq. Ft. Per Gallon (75 m2 per liter)
- Storage Stability
- Min. 1 Year
- Freeze/Thaw - Protect From Freezing
- V.O.C.
Content - 0.59%
*
Properties are typical and subject to usual manufacturing tolerances.
|
|
|
|
|
|
|
|
General Directions**
Application:
-
Strip floors to remove old waxes, sealers and finishes.
- Rinse
thoroughly and let dry.
- With
clean rayon mop apply thin, even coats of X-Coat Nano.
- Under
normal conditions, allow to dry for 15 to 20 minutes between coats.
- For
best results, apply a maximum of 4 coats in 24 hours.
Maintenance:
-
Daily: Sweep or dust mop as necessary to remove gritty soil.
- Dirty
Floors: Clean with 2-4 oz. of Nu-Tral Cleaner
(#507) per gallon of water. Rinse and let dry.
- Traffic
Area: Clean with 2-4 oz. of Nu-Tral Cleaner per gallon of water. Rinse
and let dry. Apply additional thin coats of floor finish to traffic
lanes as needed.
- Buffing:
If desired, periodic burnishing with blended hair pads will enhance
appearance.
- Periodic
Complete Maintenance: Ordinarily, stripping is not required more than
(1) or (2) times per year. Use up to 32 ozs. of our stripper per gallon
of water.
**
See label directions and MSDS for complete usage and safety instructions.
|
|
|
|
|
|
|
|
Application Hints
- X-Coat
Nano is very easy to apply with a standard finish mop and dries perfectly
clear.
- For
best results, apply four coats the first night, then follow-up a few
days later with four more coats. This gives you the desired film thickness
from which to properly maintain your floor.
|
|
|
|
|
|
|
|
|
Pad Recommendations *
| |
Propane |
Battery |
Electric
(1000+ rpm) |
3M |
Natural Blend White |
Natural Blend White |
Tan
Burnish |
Americo |
Combo
|
Luster Lite |
Beige |
ETC |
Gorilla Lite |
Aqua PLUS |
Aqua PLUS |
Glit |
100-D Neutral
Polythermal |
100-D Neutral
Polythermal |
100-D Neutral
Polythermal |
Microtron |
Jackeroo Lite |
Beige |
Beige |
Norton |
Grizzly
Bear "Lite" |
Thermal |
Thermal |
*
These are generalized classifications based on market research. Terms
and definitions may be different from manufacturer to manufacturer; however,
the above information will help to determine pad compatibility with various
floor machines and Essential finishes on the market.
|
|
|
|
|
|
|
|
Packaging Specifications
|
Package |
Sizes
Available |
|
Pack
Size
(inches) |
Cube
(ft.) |
Pack
Wt.
(Lbs.) |
Full
Pallet |
|
|
55
Gallon Drum |
783366880003 |
23
x 34 |
10.41 |
495.53 |
4 |
|
|
5
Gallon
Pail |
783366880058 |
12
x 14 |
1.17 |
46.23 |
36 |
|
|
4
x One Gallon |
783366880041 |
13
x 13.5 x 12.5 |
1.27 |
36.56 |
36 |
|
|
|
|
|
|
|
|
|
|
|
