Carpet Care Manual
Daily Cleaning Instructions

General Spotting Procedures
An aggressive spotting program, in conjunction with frequent vacuuming, is the best way to enhance appearance and promote the life of carpeting. Removing spots and spills before they become stains is crucial to a good maintenance program.

The procedures listed below will make spot removal easier and effective.

General Spotting
Gum Removal
Spotting Guide


GENERAL SPOTTING

Step 1: Test Carpet
Always test carpet for colorfastness. Determine source of spot. Refer to spotting guide for spotter choice. Apply spotter in a small, inconspicuous area and lightly rub with a clean, white cloth.

Step 2: Remove Excess Soil
Begin by removing excess soil with a bone scraper or dull knife and soak up spills with a white, clean cloth.

Step 3: Apply Spotter
Spray a small amount of spotter directly on the spot.

Step 4: Tamp
Tamp spot with a tamping brush. Do Not Scrub.

Step 5:
With a clean, white cloth blot the spot working inward from the edge to the center. Never scrub when removing a spot.

Step 6:
Extract the carpet with clean water.

Step 7:
Repeat Steps 3, 4 and 5 if visible soil still remains. Otherwise, rinse with water and blot dry with a clean cloth or extract.

GUM REMOVAL


Step 1: Colorfastness
Always test carpet for colorfastness. Apply Gum Remover (#1180) in a small, inconspicuous area and lightly rub with a clean, white cloth.

Step 2:
Apply a few drops of Gum Remover on top of the gum and let it stand for five minutes.

Step 3:
Using a bone scraper, start at the edges and force the gum to the center in a mound and remove.

Step 4:
Rinse with water and blot dry with a clean cloth or extract.

SPOTTING GUIDE