Bonnet Buff
Carpet Restorer (318CC)

Features | Properties | General Directions

Packaging Specifications | Literature Sheet | MSDS

Features

• Multi-purpose - can be used with wet or dry bonnet, or extraction system.
• Dries quickly to prevent tracking and soil build-up.
• Excellent traffic lane cleaner.
• Prevents build-up - keeps carpets cleaner longer.
  

Properties*

• Type - Solvent/Detergent Mixture
• Form - Clear Liquid
• Odor - Citrus
• Color - Green
• Weight per Gallon - 8.58 Lbs.
• pH - 11.5 - 12.5
• pH 1% - 8.6
• Foam Height - Medium Low
• Actives - 11%
  

* Properties are typical and subject to usual manufacturing tolerances.

General Directions**

Dilute Bonnet Buff as Follows:
For light soil or frequently maintained carpet - 8 oz./gal. (1:16)
For moderate soil - 10 oz./gal. (1:12)
For heavy soil - 20 oz./gal. (1:6)

Dry Bonnet Method:

1. Mix solution in pump-type garden sprayer.
2. Prespray traffic lanes and spots.
3. Prespray dry bonnets before use. This lubricates pad and reduces drag on carpet.
4. Prespray carpet section to be cleaned. Divide carpet into areas approximately 10' x 10'. If soil is light, buffing can start immediately. For heavier soiled carpeting, wait 5 minutes before starting to buff to allow the chemical to work.
5. Bonnets will clean, depending on soil, between 100 and 250 sq. ft.
   (10-25 m2) per side. As bonnets get soiled, flip over to clean side and continue buffing.

Wet Bonnet Method:
Immerse the bonnet into a bucket of diluted carpet cleaner solution. Wring out excess solution. Proceed buffing, turning and changing the bonnet pads as they get soiled.

** See label directions and MSDS for complete usage and safety instructions.

Packaging Specifications

Package	Sizes Available	UPC Codes	Pack Size (inches)	Cube (ft.)	Pack Wt. (Lbs.)	Full Pallet
	4 x One Gallon	783366318049	13 x 13.5 x 12.5	1.27	36.36	36